| 碳纤维复合材料
纤维增强热塑性树脂粒料 纤维增强热塑性树脂复合材料，是以热塑性塑料为基体，按需要添加一定量的碳纤维或玻璃纤维以及其它填料，通过特殊工艺复合而成的新型复合材料。
本公司可提供碳纤维或玻璃纤维增强的尼龙6、尼龙66、聚丙烯、聚甲醛、ABS、聚碳酸酯等塑料粒子。也可根据用户要求特别生产试制碳纤维增强的其他各种塑料粒子。
尼龙66塑料及纤维增强尼龙66塑料性能对比
| 性能 |
纯尼龙66 |
玻璃纤维增强 |
碳纤维增强 |
| 纤维含量（%） |
0 |
20 |
30 |
| 抗张强度（MPa） |
76 |
179 |
241 |
| 抗弯强度（MPa） |
110 |
262 |
351 |
| 抗弯模量（GPa） |
3.1 |
9 |
20 |
| 热变形温度（℃） |
73 |
254 |
258 |
| 体积电阻率（Ω-cm） |
1015 |
1014 |
1.0 |
| 密度（g/cm3） |
1.14 |
1.37 |
1.28 |
碳纤维/环氧预浸料 碳纤维/环氧预浸料是制造先进复合材料的重要原材料，已广泛应用于航空航天部门、体育运动器材及其他领域。
本公司采用先进的热熔法工艺、利用从美国引进的全套生产设备，年产能力100吨，能生产600mm宽度的碳纤维/环氧预浸料－单向无线布，其性能规格可严格控制。主要参数如下：
| 幅宽(mm) |
12－600 |
| 单位面积纤维重量(AFW)(g/m2) |
100-175 |
| 树脂含量(%) |
38-42 |
| 挥发物含量(%) |
≤0.8 |
| 单层厚度(未固化)(mm) |
0.14-0.18 |
| 固化温度/时间(℃/min) |
150/60 |
本公司是热熔法、阔幅碳纤维/环氧预浸料生产单位，除了可供应上列规格的预浸料外，还可按用户要求生产，或来料加工。
|
|
PAN基碳纤维/环氧预浸料 |
|
|
从美国引进的预浸带设备流水线 |
 |
纤维增强热塑性树脂及部分制品 |
Carbon
Fiber Composites
Carbon fiber / epoxy prepreg Fiber
reinforced thermoplastic resin composite is a novel composite,
which is composited by a special process using thermoplastic
plastics as matrix, a certain quantity of carbon fibers or
glass fibers and other fillers as substrates.
We can supply carbon fiber of glass fiber reinforced nylon
6, nylon 66, polyacrylic, polyformaldehyde, ABS, polycarbonate
pellets.
contrasts between nylon 66 plastics
and fiber reinforced nylon 66 plastics
| properites |
nylon 66 |
glassfiber reinforced |
carbon fiber reinforced |
| fiber content（%） |
0 |
20 |
30 |
| tensile strength（MPa） |
76 |
179 |
241 |
| flexural strength（MPa） |
110 |
262 |
351 |
| flexural modulus（GPa） |
3.1 |
9 |
20 |
| heat reformation temperature（℃） |
73 |
254 |
258 |
| bulk specific resistance（Ω-cm） |
1015 |
1014 |
1.0 |
| density（g/cm3） |
1.14 |
1.37 |
1.28 |
Carbon fiber / epoxy prepreg Carbon
fiber / epoxy prepreg is an important raw material for making
advanced composties. It has found its wide applications in
aviation and aerospace departments, physical education and
sports equipments and other fields in the world.
We have a complete set of prepreg production line (Hot Melt
Method) imported from U.S.A. with a capacity of 100 Ton /annual.
We can produce unidirectional sheets of carbon fiber/epoxy
prepreg with a width of 600mm. The properties and specifications
are under strict control. The main parameters are as follows:
| width(mm) |
12－600 |
| areal fiber weight (AFW)(g/m2) |
100-175 |
| resin content (%) |
38-42 |
| volatile matter (%) |
≤0.8 |
| thickness of single-ply(uncured)(mm) |
0.14-0.18 |
| curing temperature/time(℃/min) |
150/60 |
The company is the sole manufacturer in the continent of
China manufacturing carbon fiber/epoxy prepreg of wide
width by Hot melt Method. We can also produce according to
customers' requirements and process customers' materials besides
supplying specifications mentioned above.
|
